Set Up Automatic Tag Removal in KlickTipp

This guide will show you how to easily set up automatic tag removal in KlickTipp. By doing so, you’ll maintain a clear overview and have better control over your marketing processes.

There are two simple ways to remove tags: by assigning a different manual tag or by revoking a tag through a campaign in the Marketing Cockpit.

Step-by-Step Instructions

Tag Revocation when another Manual Tag is Assigned

  • Click on the menu → Automation  → Tags.
  • Select the tag you want to edit.
  • Under → Automatic tag removal,you can select the tag to be removed.
  • Finally, click → Save  to confirm your selection.

Tag Removal via a Campaign in the Marketing Cockpit

  • To do this, select a stopped campaign under → Campaigns  or create a new one.
  • Add a “Remove tag / SmartLink” action to the campaign at the point where a tag is to be removed.
  • Name the action and select the tag to be removed.

As soon as a contact reaches the action in the campaign, the tag you have selected is withdrawn.

Good to Know

If a tag has been assigned and later withdrawn, it is treated as if it had never been assigned.

Example: A campaign starts due to a tag assignment within the last 24 hours. However, if the tag is withdrawn again within this time, the campaign will not start. KlickTipp then reacts as if the tag had never been assigned.

With these simple steps you can make the most of automatic tag removal in KlickTipp. This will ensure that your contacts always have the right tags.

This gives you control over tag management and optimizes your marketing processes.

Did this post help you?

Back to overview: Contact Management

Related Posts: